3-42
Settings and Measurement
(9) Data Replay Menu
When you press the MENU key during replay, the Data Replay Menu is displayed.
(9)-1 Move to First Data
Moves the currently selected cursor (A or B) to the start of the data.
(9)-2 Move to Last Data
Moves the currently selected cursor (A or B) to the end of the data.
(9)-3 Move to Center
Moves the currently selected cursor (A or B) to the center of the data.
Setting Selections available
Cursor Position Move to First Data Execute
Move to Last Data Execute
Move to Center Execute
Move to Trigger Position Execute
Move to Method Position, Time
Selected [Position] Move to From 0 to Last Data
Position For example, the position is up to 9999 ms if the sampling
interval is 1 ms, the data capture destination is the internal
RAM, and the number of capture points is 10000.
[Time] Date From the date of First Data to the date of Last Data
Time From the time of First Data to the time of Last Data
Cursor Sync Off, On
Data Search Level Combination Edge OR, Edge AND
Settings Mode Analog : Off,
↑
H,
↓
L, Win In, Win
Logic : Off,
↑
H,
↓
L
Pulse : Off,
↑
H,
↓
L, Win In, Win Out
Level Numeric value setting
Alarm CH Off, Output 1, Output 2, Output 3, Output 4
Alarm CH mode
↑
Rising,
↓
Falling
Next Search Execute
Prev. Search Execute
Statistical Calculation Statistical Calculation Off, Average, Max, Min, Peak, RMS
between Cursors Execute Execute
X-Y Display Settings X-ch CH1 to CH8
Y-ch CH1 to CH8
Trace Off, On
Execute X-Y for All Data Execute
Execute X-Y between Cursors
Execute
[xxx] shows a case in which xxx is selected from available selections.
To Next Page
Loading...
