66
EN
Safety
Safety instructions
Safety instructions are indicated in this manual by symbols. The safety instructions are introduced by
signal words that express the extent of the danger.
This combination of symbol and signal word indicates a potentially dangerous situation that
may result in death or severe injuries if the situation is not avoided.
WARNING!
This combination of symbol and signal word indicates a potentially dangerous situation that
may result in minor or slight injuries if the situation is not avoided.
CAUTION!
This combination of symbol and signal word indicates a potentially dangerous situation that
may result in material damage if the situation is not avoided.
NOTE!
This combination of symbol and signal word indicates potential dangers for the environment.
ENVIRONMENTAL
PROTECTION!
Tips and recommendations
This symbol highlights useful tips and recommendations, as well as information for efcient
and fault-free operation.
Intended use
• The clock timer is intended solely for switching electric devices in private and commercial areas,
provided this does not infringe on the intended use of these devices.
• The clock timer may only be installed on DIN rails.
The intended use also includes compliance with all information specied in this manual.
To Next Page
Loading...
