71
letter in the group, A. Likewise, to type the letter B, press 2 to select the ABC
group, then press 2 again to select the second letter in the group. And, to
type the letter C, simply press 2, then 3 to select the third letter in the “ABC”
group.
To enter numbers in alphanumeric text fields, press 1 first, then the number
you wish to type.
To enter punctuation, press 0 first to see the first set of punctuation, then
press the number key that corresponds with the position of the desired
punctuation mark in the set.
Press the • (period) key to enter a SPACE.
While using Standard Text Entry, the FUNC key serves as a shift key. For
letters, uppercase text is typed by default, and you can shift to lowercase
by pressing the FUNC key before entering a character. For punctuation, the
FUNC key accesses a second set of punctuation marks. The shift action of
the FUNC key remains active until it is pressed again.
Use the
34
keys to move the cursor to the desired location in edit fields.
Press FUNC
3
or FUNC
4
to move the cursor to the beginning or end of
an edit field, respectively. Use the CL key as a backspace key to erase char-
acters before the cursor, and press FUNC CL to clear the entire field.
The PSR-310 character set and corresponding entry codes are provided be-
low for reference. Pressing FUNC to toggle the shift lock status will produce
lower case characters for letters, and a second set of punctuation marks for
special characters. For brevity, lower case letters are not shown in the table
below.
Char Code Char Code Char Code Char Code
A 21 O 63 3 13 ? 07
B 22 P 71 4 14
→
08
C 23 Q 72 5 15 ‘ 09
D 31 R 73 6 16
←
00
E 32 S 74 7 17 . (F)01
F 33 T 81 8 18 - (F)02
G 41 U 82 9 19 # (F)03
H 42 V 83 0 10 _ (F)04
I 43 W 91 $ 01 @ (F)05
J 51 X 92 % 02 + (F)06
K 52 Y 93 ! 03 * (F)07
L 53 Z 94 ^ 04 & (F)08
M 61 1 11 ( 05 / (F)09
N 62 2 12 ) 06 , (F)00
To Next Page
Loading...
