91
Delay Time 1-200
Sets the amount of time (in 100 mil-
lisecond intervals) for the wait for re-
ply delay if Delay is On, e.g., 20=2
seconds.
Zeromatic On or Off
When on, enhances the scanner’s
ability to lock on to the actual center
frequency of a search hit instead of
an adjacent frequency.
Search Dir Up or Down
Sets search direction used when
LMIT object is active.
Hit Count Numeric value
Increments each time a transmis-
sion is received on the SWPR ob-
ject. Global “Hit Counts” must be
set to ON. Press the
Dflt
softkey
to reset to 0.
SRVC Menu Reference
The SRVC menu is used when creating new Service Search objects, or edit-
ing existing Service Search objects. All menus are shown in the scanner's
display as a three line window that can be scrolled up or down to access the
various different parameters. The active parameter is always the middle pa-
rameter and is indicated by a flashing “
:
”. The entire SRVC menu is shown
below:
SRVC Parameter Options Description
Scan Lists
On or Off for Scan
Lists 1-22
Sets membership in Scan Lists.
Use
3 4
keys to scroll through
Scan Lists. Use SEL key to toggle
Scan List membership. A “
*
” next
to the Scan List number indicates
that the object is mapped to that
Scan List.
To Next Page
Loading...
