Grecom PSR-310 - Detailed Menu Reference; GLOB Menu Reference

78
Detailed Menu Reference
Your PSR-310 scanner uses GRE's exclusive Object Oriented User Interface,
which features a powerful menu system that is used to configure the various
Scannable Objects that your scanner is capable of receiving. The PSR-310
design also includes a Global Settings (GLOB) menu that provides unprec-
edented control over the radio wide settings used throughout your scanner.
This section of the manual provides detailed information about all of the
menus and menu parameters.
Each menu parameter features a
Dflt
softkey that can be used to re-
store the value to the factory defaults. This can be very useful if you make a
change to a parameter but do not like the result.
HINT: Remember that context sensitive help is available for every menu
parameter. Press FUNC SEL to view help for the selected parameter. Press
SEL to exit help.
HINT: It's easy to fix things if you inadvertently change a parameter and
then can't remember how to make it right again. Each parameter includes a
Dflt
softkey, which, when pressed, restores the factory default setting for
that parameter.
HINT: If you think you've really messed the Global settings up, you can
reset every global parameter back to factory defaults without altering your
programmed objects. Turn the radio off, then on again. While the “Welcome”
screen is being displayed, press and release 0, then press and release 2.
Press ENT to confirm the reset of all global parameters to their factory de-
faults.
NOTE: The Special Global Settings menu (FUNC GLOB) includes param-
eter settings that, if not set properly, may adversely affect the performance
of your radio. We recommend that users not change the settings found in
the FUNC GLOB menu unless instructed to in this manual or directed to do
so by GRE Technical Support personnel. Should you experience difficulties
after changing any of the settings in the FUNC GLOB menu, you can also
restore those settings to factory defaults by pressing the
Dflt
softkey as-
sociated with each menu line, or following the 0,2 global settings reset pro-
cedure described above.
GLOB Menu Reference
The GLOB menu stores all of the radio-wide settings used by the scanner.
The GLOB menu allows you to “tweak” these settings to your liking. The
default settings will work fine for most users, but most users will want to use
the GLOB menu to personalize the radio to suit their individual tastes. The
active parameter is always the middle parameter and is indicated by a flash-
ing “
:
”. The entire GLOB menu is shown below. Note that some GLOB pa-
rameter changes do not take effect until the GLOB menu is saved.