82
Search Delay 1-100 x 100 mS
Sets wait for reply delay for all
search modes
TLO=FUNC L/O Yes or No
Controls the operation of the L/OUT
key. When No, pressing L/OUT per-
forms a Temporary Lockout of the
selected object. When Yes, press-
ing L/OUT performs a Permanent
Lockout of the selected object.
DupeChecksSQ Yes or No
If set to Yes, dupe checking will
check both the stored frequency
and any encoded squelch settings
when checking for duplicate CONV
objects.
TGID Format Norm, DEC or HEX Selects TGID display format
TGRP Ignore Yes or No
If set to Yes, TGRP wildcards will
ignore calls on previously stored
TGRPS that are mapped to dis-
abled Scan Lists.
ShowCCInfo Yes or No
For Motorola systems, shows cur-
rent control channel index (from
TSYS frequency list) and frequency
alternating with the voice frequency.
Set password SEL Sets the power-on password.
CONV Menu Reference
The CONV menu is used when creating new Conventional Channel objects,
or editing existing Conventional Channel objects. All menus are shown in
the scanner's display as a three line window that can be scrolled up or down
to access the various different parameters. The active parameter is always
the middle parameter and is indicated by a flashing “
:
”. The entire CONV
menu is shown below:
CONV Parameter Options Description
Scan Lists
On or Off for Scan
Lists 01-22
Sets membership in Scan Lists. Use
34
keys to scroll through Scan
Lists. Use SEL key to toggle Scan
List membership. A “
*
” next to the
Scan List number indicates that the
object is mapped to that Scan List.
Freq
Any supported fre-
quency in MHz
The frequency that the CONV ob-
ject will use.
To Next Page
Loading...
