Grecom PSR-310 - SWPR Menu Reference

94
Atten On or Off
When on, applies 20 dB of attenua-
tion to all hits received on the SRVC
search. Useful in areas where inter-
ference from nearby strong signals
is present.
Delay On or Off
Controls whether a Delay is used to
wait for reply traffic after a transmis-
sion on the SRVC search.
Delay Time 1-200
Sets the amount of time (in 100
millisecond intervals) for the wait
for reply delay if Delay is On, e.g.,
20=2 seconds.
Zeromatic On or Off
When on, enhances the scanner’s
ability to lock on to the actual cen-
ter frequency of a search hit instead
of an adjacent frequency.
Search Dir Up or Down
Sets search direction used when
SRVC object is active.
Hit Count Numeric value
Increments each time a transmis-
sion is received on the SWPR ob-
ject. Global “Hit Counts” must be
set to ON. Press the
Dflt
softkey
to reset to 0.
SWPR Menu Reference
The SWPR menu is used when creating new Spectrum Sweeper objects,
or editing existing Spectrum Sweeper objects. All menus are shown in the
scanner's display as a three line window that can be scrolled up or down to
access the various different parameters. The active parameter is always the
middle parameter and is indicated by a flashing “
:
”. The entire SWPR menu
is shown below:
SWPR Parameter Options Description
Scan Lists
On or Off for Scan
Lists 1-22
Sets membership in Scan Lists.
Use
3 4
keys to scroll through
Scan Lists. Use SEL key to toggle
Scan List membership. A “
*
” next
to the Scan List number indicates
that the object is mapped to that
Scan List.