Grecom PSR-310 - TGRP Menu Reference

84
Alarm
None, Chirp, Hi-Lo,
Alert, Ring, 2-Chirp,
Fast Hi-Lo, DTMF#
Sets the Audible Alarm for the
CONV object. When an Audible
Alarm is selected, the selected
alarm will play at the beginning of
each transmission on the CONV ob-
ject, or anytime the scanner stops
for activity on the CONV object
while scanning.
Fav Yes or No
When Yes, the CONV object is a
member of the Favorites Scan List.
Skywarn Yes or No
When Yes, the CONV object is a
member of the Skywarn Scan List.
EXPERT BELOW
Modulation AM, FM, NFM, Auto
Modulation setting for the CONV
channel. In most cases Auto will
work fine. Use AM to override and
force AM modulation, FM to force
FM mod ul ati on, NF M to fo rce
narrow FM modulation.
Atten On or Off
W h e n o n , a p p l i e s 2 0 d B o f
attenuation to all transmissions on
the CONV channel. Useful in areas
where interference from nearby
strong signals is present.
Delay On or Off
Controls whether a Delay is used
to wait for reply traffic after a
transmission on the CONV channel.
Delay Time 1-200
Sets the amount of time (in 100
millisecond intervals) for the wait
for reply delay if Delay is On, e.g.,
20=2 seconds.
AudioBoost On or Off
Applies a 6 dB boost to audio levels
when the object is active
Hit Count Numeric value
Increments each time a transmis-
sion is received on the SWPR ob-
ject. Global “Hit Counts” must be
set to ON. Press the
Dflt
softkey
to reset to 0.
TGRP Menu Reference
The TGRP menu is used when creating new Trunking Talkgroup objects,
or editing existing Trunking Talkgroup objects. All menus are shown in the
scanner's display as a three line window that can be scrolled up or down to