55
When AutoMove HRs is turned on, you may enter the LTR system frequen-
cies in any order, and the PSR-310 will automatically move the frequencies
to the proper home repeater slots as transmissions are received on the sys-
tem.
Priority Scan
Your PSR-310 scanner features Priority Scan operation for CONV and TGRP
objects. When Priority Scan is active, increased priority is given to objects
that have their Priority mode set to ON.
Turning Object Priority On or Off
Priority for CONV and TGRP objects can be toggled on or off using the fol-
lowing methods:
Press the PRI key when the scanner stops on the object while it is active.
The
plD
indicator in the object display will show
p
for Object Priority Off,
and
P
for Object Priority On.
Browse to an object in Manual Mode or PGM mode, then press the PRI key
to toggle Object Priority on or off. The
plD
indicator in the object display
will show
p
for Object Priority Off, and
P
for Object Priority On.
Browse to an object in PGM mode. Press the
EDIT
, then
CURR
softkeys.
Use the
6
key to scroll to the Priority setting. Use the
3
or
4
keys to toggle
Priority On or Off.
When creating a new object, before saving the object scroll to the Priority
setting. Use the
3
or
4
keys to toggle Priority On or Off.
Turning Priority Scan Mode On or Off
While the radio is scanning, press FUNC, then PRI to toggle Priority Scan
On or Off. Priority Scan status is shown in the man Scanning status display.
PRI
indicates that Priority Scan mode is on, and
pri
indicates that Priority
Scan mode is off.
CONV Priority Scan
When Object Priority is set to Yes for one or more CONV objects, the scan-
ner will sample the CONV objects for activity periodically while scanning and
monitoring other objects.
This sampling will cause a brief muting of received audio when it occurs
while another object is active.
The more CONV objects are set for Priority, the longer this audio muting will
be, since it takes a certain amount of time to sample each Priority CONV ob-
ject for activity.
To Next Page
Loading...
