89
T Tables
D e f a u l t , S p l i n t e r,
Custom
For Motorola systems only - sets
custom channel tables. Use
34
,to
select option, press SEL on Cus-
tom to enter custom table informa-
tion
Fleet Map
TypeII, E1P1, E1P2,
E1P3, E1P4, E1P5,
E1P6, E1P7, E1P8,
E1P9, E1P10E1P11,
E 1 P 1 2 , E 1 P 1 3 ,
E 1 P 1 4 , E 1 P 1 5 ,
E1P16, CUATOM
For Motorola Type I systems only -
sets fleet map
AutoMove HRs On or Off
For LTR systems only – sets Home
Repeater AutoMove
LMIT Menu Reference
The LMIT menu is used when creating new Limit Search objects, or editing
existing Limit Search objects. All menus are shown in the scanner's display
as a three line window that can be scrolled up or down to access the various
different parameters. The active parameter is always the middle parameter
and is indicated by a flashing “
:
”. The entire LMIT menu is shown below:
LMIT Parameter Options Description
Scan Lists
On or Off for Scan
Lists 1-22
Sets membership in Scan Lists. Use
3 4
keys to scroll through Scan
Lists. Use SEL key to toggle Scan
List membership. A “
*
” next to the
Scan List number indicates that the
object is mapped to that Scan List.
FrLo
Any supported fre-
quency in MHz
A frequency that will be used as the
lower limit for the limit search range
FrHi
Any supported fre-
quency in MHz
A frequency that will be used as the
upper limit for the limit search range
Tag Alpha-numeric text
The alphanumeric display name for
the LMIT search. Use the standard
text entry method or QTXT to name
the object.
L/Out On or Off
Permanent lockout for the LMIT
channel. Also accessed by pressing
FUNC L/OUT while the scanner is
stopped on the LMIT object.
To Next Page
Loading...
