Grecom PSR-310 - Hit Counters; Audible Alarms and the ALERT LED

56
TGRP Priority Scan
When Object Priority is set to Yes for one or more TGRP objects, the scan-
ner will give those TGRPs priority over other TGRPs while checking a par-
ticular trunking system for activity. TGRPs configured for Priority are checked
for activity before any other TGRPs are checked, and during the reply delay
time after non-priority TGRP calls.
Additionally, your PSR-310 decodes the subaudible priority data that is pres-
ent on analog Motorola talkgroup calls (3600 baud control channel systems
only), and will switch to a priority talkgroup when the data for that talkgroup
is found in the subaudible priority data.
Hit Counters
Your PSR-310 includes a unique Hit Counter feature that keeps track of how
many transmissions are received for each object type. The Hit Counter for
an object is incremented each time a transmission is received on an object,
making it possible for you to determine the objects that are the least and
most active.
By default, the Hit Counter feature is turned off. To turn the Hit Counter on,
press PGM, then the
GLOB
softkey, and use the
6
key to scroll down to the
Hit Counts item. Use the
34
keys to toggle Hit Counts on and off. When
finished, press the
SAVE
softkey to save your changes to the radio's con-
figuration memory.
You can view the hit counts for an object by navigating to the object by
pressing PGM, then using the
3456
keys to navigate to the desired
object, if necessary. Once you have selected the desired object, press the
EDIT
softkey, then the
CURR
softkey, and scroll to the Hit Count item bot-
tom of the object menu to view the hit counter.
To reset the hit counter for a single object, press the
Dflt
softkey while the
Hit Count item is selected in the object's menu.
To clear all hit counters, press the PGM key, then the
GLOB
softkey. Use the
6
key to scroll down to the
Clear Hits
item, then press the SEL key.
Press the
SAVE
softkey to save your changes and exit the Global settings
menu.
Audible Alarms and the ALERT LED
Your PSR-310 features a very powerful ALERT LED with Audible Alarm capa-
bility that allows you to set different types of visual and audible notifications
for the different types of objects you create.
You may have noticed that the menus for each object you create include
various settings for LED, Backlight and Alarm. You can use these settings to
design custom visual and/or audible alarms that are triggered when activity
is detected on the specified Scannable Object.