83
Tag Alpha-numeric text
The alphanumeric display name for
the CONV channel. Use the stand-
ard text entry method or QTXT to
name the object.
Sq Mode
Search, None, CTC-
SS, DCS
Sets subaudible squelch mode. Use
Search to automatically analyze
signals to determine squelch mode
and code. Use None to ignore sub-
audible squelch. Use CTCSS for
tone coded squelch, or DCS for
digital coded squelch. Used in con-
junction with Squelch Code param-
eter below.
Squelch Code
S e a r c h , C T C S S
tone, DCS Code, n/a
Sets CTCSS tone, or DCS code de-
pending on Sq Mode setting. Use
Search to detect tone or code value
for selected squelch type.
L/Out On or Off
Permanent lockout for the CONV
channel. Also accessed by pressing
FUNC L/OUT while the scanner is
stopped on the CONV object.
Priority On or Off
Turns Priority Mode on or off for the
CONV object.
LED Mode Solid or Flash
Controls whether the ALERT LED
flashes or remains on solid when
the ALERT LED is used.
LED Color 0-7
Sets LED color to 0-7 as defined in
the GLOB menu. By default, 0=LED
Off, 1=Red, 2=Yellow, 3=Green,
4=Cyan, 5=Blue, 6=Magenta,
7=White.
Latch LED On or Off
Normally the ALERT LED is active
only while the object is receiving a
transmission. When Latch is on, the
ALERT LED will remain lit after the
transmission is complete, unless
overridden by a subsequent object
that is also using the ALERT LED.
Backlight On, Off or Flash
Controls whether the backlight
should be on, off or flashing while
the object is active.
To Next Page
Loading...
