69
Press the
STOR
softkey to create a new CONV object using the found
frequency.
Using dedicated SRVC mode
Your scanner's dedicated SRVC search modes provide you with the ability
to instantly access each of the scanner's service search ranges without
creating a new SRVC object.
To activate dedicated SRVC search mode, press the SRCH key on the
keypad repeatedly until the desired service search is indicated on the
display. The following service searches are available:
Railroad - searches the Association of American Railroads (AAR) VHF
railroad frequencies used in the US and Canada
Public Safety (PubSafety) - Searches commonly used public safety
frequencies. Groups are as follows:
0: 33.42-46.5 MHz VHF Low Band
1: 151.82-170.15 MHz VHF High Band
2: 453.0375-467.7125 MHz UHF Band
3: 764.0000-766.996875 MHz 700 MHz Band
769.0000-775.998675 MHz
794.0000-796.996875 MHz
4: 851.0125-868.996875 MHz 800 MHz Band
Aircraft - Searches civilian and military air frequencies. Groups are as
follows:
0: 108-118 MHz Navigation
1: 118-137 MHz Civilian Voice
2: 138-150 MHz Military Voice (excludes 2m Amateur)
3: 225-400 MHz Military Voice
Ham - Searches amateur radio frequencies. Groups are as follows:
0: 28.0-29.7 MHz 10m Band
1: 50-54 MHz 6m Band
2: 144-148 MHz 2m Band
3: 222-225 MHz 1.25cm Band
4: 420-450 MHz 70cm Band
5: 902-928 MHz 33cm Band
6: 1240-1300 MHz 23cm Band
CB - Searches the citizen's band radio frequencies
To Next Page
Loading...
