29
4) Touch the desired time point and input the hour and minute (as shown in the figure
below).
5) Then, touch “□” under “Select” to make it turn to “√”, which then indicates the
corresponding period has been invalidated.
6) After that, press the saving icon at the upper right corner to save this setting, or press
the back icon at the upper left corner to give up this setting.
(7)Manual Defrosting
Operation Instructions
1) At the function setting page, by touching “Manual-defrost”, the control panel will
access to the page as shown below.
A Series Modular-type Air-cooled (Heat Pump) Chiller
To Next Page
Loading...
