28
(5)Timer ON/OFF
Operation Instructions
At the function setting page, by touching “Timer ON/OFF”, the control panel will go to the
corresponding setting page. Then, select the desired option. After that, by touching “OK”,
this setting will be saved and the control panel will go back to the function setting page; or
by touching “Cancel” this setting will not be saved and directly go back to the function
setting page.
[Notes]
1) It is defaulted to be “Off” upon first power-on.
2) When “Contact-control ON/OFF” has been activated, “Timer ON/OFF” will be
automatically be deactivated.
3) When it has been activated, it will access to the “Timer setting” page. Please see
Section 2.2.6 for more details.
4) It can be memorized upon power failure.
(6)Timer Setting
Operation Instructions
1) At the function setting page, by touching “Timer setting”, the control panel will go to the
corresponding setting page, as shown in the figure below.
2) Select the week day from Monday to Sunday by the “↑” and “↓“ keys.
3) There are four time periods for each week day. Each time period can be set to ON or
OFF.
A Series Modular-type Air-cooled (Heat Pump) Chiller
To Next Page
Loading...
