EasyManua.ls Logo

Gree A Series - Page 32

Gree A Series
139 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
27
touching OK”, this setting will be saved and the control panel will go back to the function
setting page; or by touching Cancel this setting will not be saved and directly go back to
the function setting page.
[Notes]
1) For the cooling only unit, only “Cool” is available.
2) When it is set to “Manual-defrost”, it will access to the corresponding setting page.
Then, see Section for more details.
3) It can be memorized upon power failure.
(2)Electric Heating
Operation Instructions
At the function setting page, by touching Electric heating”, the control panel will go to the
corresponding setting page. Then, select the desired option. After that, by touching OK”,
this setting will be saved and the control panel will go back to the function setting page; or
by touching “Cancel” this setting will not be saved and directly go back to the function
setting page.
[Notes]
1) It is defaulted to be “Off” upon first power-on
2) This function is unavailable for the cooling only unit.
3) It can be memorized upon power failure.
(3)Auto anti-freezing
Operation Instructions
At the function setting page, by touching Auto anti-freezing”, the control panel will go to
the corresponding setting page. Then, select the desired option. After that, by touching
OK”, this setting will be saved and the control panel will go back to the function setting
page; or by touching Cancel this setting will not be saved and directly go back to the
function setting page.
[Notes]
1) It is defaulted to be “On” upon first power-on
2) It can be memorized upon power failure.
(4) Contact-control ON/OFF
Operation Instructions
At the function setting page, by touching Contact-control ON/OFF”, the control panel will
go to the corresponding setting page. Then, select the desired option. After that, by
touching OK”, this setting will be saved and the control panel will go back to the function
setting page; or by touching Cancel this setting will not be saved and directly go back to
the function setting page.
[Notes]
1) It is defaulted to be “Off” upon first power-on
2) It can be memorized upon power failure.
A Series Modular-type Air-cooled (Heat Pump) Chiller

Table of Contents

Other manuals for Gree A Series

Related product manuals