50
2) The setting value for the system clock can be changed by the sliding the blue digits.
Then, by touching the saving icon, this setting will be saved and rightly take effective.
While, by touching the back icon, this setting will not be saved and the controller will
back to the general setting page.
(4)Language Setting
Operation Instructions
1) At the function setting page, by touching “GENERAL”, the control panel will go to the
corresponding setting page. Then, by touching “Language”, the controller will access to
the language setting page, as shown in the figure below.
2) Select the desired language. Then, by touching “OK”, this setting will be saved and
take effective; while by touching “Cancel”, this setting will not be saved and the
controller will back to the general setting page.
(5)Program Information
Operation Instructions
At the function setting page, by touching “GENERAL”, the control panel will go to the
A Series Modular-type Air-cooled (Heat Pump) Chiller
To Next Page
Loading...
