-38-
Model G0561 (Mfd. Since 01/08)
SECTION 6: MAINTENANCE
Cleaning the Model G0561 is relatively easy. Use
a brush and a shop vacuum to remove chips and
other debris from the machine. Keep the non-
painted surfaces rust-free with regular applica-
tions of a high-quality rust preventative like G96
®
Gun Treatment, SLIPIT
®
, or Boeshield
®
T-9.
Periodically, remove the blade and thoroughly
clean all metal chips or built-up grease from the
wheel surfaces and blade housing.
Cleaning
For optimum performance from your machine,
follow this maintenance schedule and refer to any
specific instructions given in this section.
Daily Check:
• Loose mounting bolts.
• Damaged saw blade.
• Worn or damaged wires.
• Any other unsafe condition.
• Clean after each use.
• Proper blade tension.
Monthly Check:
• Lubricate vise screw.
• Check gear box lubrication.
Schedule
To reduce risk of shock or
accidental startup, always
disconnect machine from
power before adjustments,
maintenance, or service.
To Next Page
Loading...
Need help?
General
