Model G0704 (Mfg. Since 08/11)
-13-
SECTION 3: SETUP
The following are needed to complete the setup
process, but are not included with your machine:
Description Qty
• Precision Level ........................................... 1
• Safety Glasses (for each person) ............... 1
• Standard Screwdriver #3 ............................ 1
• Solvent/Cleaner .......................................... 1
• Shop Rags .................................................. 1
• Metal Shim Stock ....................................... 1
• Brass Hammer ........................................... 1
• Lifting Strap (Rated for at least 500 lbs.) .... 1
• Lifting Equipment
(Rated for at least 500 lbs.) ........................ 1
• An Assistant ............................................... 1
Needed for Setup
Wear safety glasses dur-
ing the entire set up pro-
cess!
This machine presents
serious injury hazards
to untrained users. Read
through this entire manu-
al to become familiar with
the controls and opera-
tions before starting the
machine!
The Model G0704 is a
heavy machine. Serious
personal injury may occur
if safe moving meth-
ods are not used. To be
safe, get assistance and
use power equipment to
move the shipping crate
and remove the machine
from the crate.
Your machine was carefully packaged for safe
transportation. Remove the packaging materials
from around your machine and inspect it. If you
discover any damage, please call us immediately
at (570) 546-9663
for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the condi-
tion of your shipment, inventory the contents.
Unpacking
SUFFOCATION HAZARD!
Keep children and pets away
from plastic bags or packing
materials shipped with this
machine. Discard immediately.
To Next Page
Loading...
Need help?
General
