Model G0704 (Mfg. Since 08/11)
-35-
G9512—T-Slot Nuts, 4 PK,
1
/2" Slot,
3
/8"-16
Heat treated steel T-Slot Nuts with black oxide
finish feature an imperfect thread in the base of
the T-nut to eliminate any danger of screwing the
clamping stud through and damaging the table
slot.
Figure 42. Model G9512 T-Slot Nuts.
G9849—Magnetic Base/Dial Indicator Combo
Precision measurements and setups have never
been so easy. Magnetic base engages with just
the turn of a switch and allows pinpoint adjust-
ment. The dial indicator features 0-1" travel and
has a resolution of 0.001". This fine set includes a
molded case for protection and convenience.
Figure 44. Model G9849 Indicator/Base Combo
G5758—Tilt Table 5" x 7"
Set your work at any angle with these sturdy tilt
tables. Heavy-duty construction includes T-slots,
two locking screws and precision base that allows
the table to tilt from -45 Degrees to +45 Degrees.
Table size: 5" x 7".
Figure 43. Model G5758 Tilt Table.
To Next Page
Loading...
