Model G4003 (Mfd. Since 6/20)
-35-
SECTION 7: ACCESSORIES
Installing unapproved accessories may
cause machine to malfunction, resulting in
serious personal injury or machine damage.
To reduce this risk, only install accessories
recommended for this machine by Grizzly.
NOTICE
Refer to our website or latest catalog for
additional recommended accessories.
G4005—Optional Lathe Stand for G4003
Measures 57"L x 15"W x 29"H. Approximate ship-
ping weight: 157 lbs.
Figure 46. G4005 Lathe Stand for G4003.
T23962—ISO 68 Moly-D Way Oil, 5 gal.
T23963—ISO 32 Moly-D Machine Oil, 5 gal.
T26685—ISO 32 Moly-D Machine Oil, 1 gal.
Moly-D oils are some of the best we've found for
maintaining the critical components of machinery
because they tend to resist run-off and maintain
their lubricity under a variety of conditions—as
well as reduce chatter or slip. Buy in bulk and
save with 5-gallon quantities.
Figure 49. ISO 68 and ISO 32 Moly-D oils.
T23962 T23963 T26685
T26419—Syn-O-Gen Synthetic Grease
Formulated with 100% pure synthesized hydrocar-
bon basestocks that are compounded with special
thickeners and additives to make Syn-O-Gen
non-melt, tacky, and water resistant. Extremely
low pour point, extremely high temperature oxida-
tion, and thermal stability produce a grease that is
unmatched in performance.
Figure 47. T26419 Syn-O-Gen Grease.
T10556—Taper Attachment for Model G4003
The Model T10556 Taper Attachment provides
precision outside and inside tapers up to 12" with-
out having to offset the tailstock or disengage the
cross slide. This allows the taper attachment to
be used at any time by simply tightening the bed
clamp bracket. However, the taper attachment
does not interfere with other turning operations.
The T10556 features scales at both ends, read-
ing inches-of-taper per foot and angle of taper.
An adjustment knob with fine threads achieves
precise control when setting tapers.
Figure 48. T10556 Taper Attachment.
To Next Page
Loading...
Need help?
General
