65
66
If the inverter does not operate in the future, it needs to be properly disposed. The steps
are as follows:
1>Disconnect the external AC short circuit and prevent reconnection due to
misoperation.
2>Turn the DC switch to "OFF" position.
3>Wait at least 5 minutes until the internal capacitor discharge is completed.
4>Disconnect the AC connector.
5>Disconnect DC connector.
6>Remove the inverter from the wall.
7>Disposing of the inverter.
11 Decommissioning
11.1 Disposing Of The MAX Series Inverter
Do not dispose of MAX series inverter together with household
waste. Please accordance with the disposal regulations for
electronic waste which apply at the installation site at that time.
Ensure that the old unit and, where applicable, any accessories are
disposed of in a proper manner.
12 Quality assurance
Please refer to related file.
Contact 13
If you have technical problems concerning our products, contact your installer or
Growatt, please provide information below for better support.
1>Inverter type
2>Serial number of inverter
3>Error code of inverter
4>LED status of inverter
5>DC input voltage of inverter (Modules information)
6>Inverter communication method
Shenzhen Growatt New Energy Technology Co.,LTD
No.28 Guangming Road, Shiyan Street, Bao'an District, Shenzhen, PR.China
T： +86 0755 2747 1942
E： service@ginverter.com
W： www.ginverter.com
To Previous Page
Loading...
Need help?
General
