Growatt SPH4000 Installation Manual

logistical and process costs incurred by all parties in relation to this warranty claim.
11 Decommissioning
11.1 Dismantling the energy storage
1. Disconnect the storage machine such as mentioned in section 7。
2. Disconnect the upper cable of SPH inverter
Watch out the SPH’s shell heat and prevent to scald
Wait 20 minutes until the SPH cooling and then to disassembly!
3. Unscrew all the connecting cable
4. Unscrew the radiator and wall-mounted anchor screw and then take down the machine from wall.
11.2 Packing the SPH inverter
Usually placed SPH inverter in the packing box with tape sealing, if the SPH inverter cannot reoccupy, you can
choose a cheap carton for packaging. Carton requirements must meet the size of the inverter and can support
energy storage machine overall weight.
11.3 Storing SPH inverter
Store SPH inverter in a dry place where ambient temperatures are always between -25°C and +60°C
11.4 Disposing of the SPH inverter
Do not dispose of SPH inverter together with household waste. Please accordance with the
disposal regulations for electronic waste which apply at the installation site at that time.
Ensure that the old unit and, where applicable, any accessories are disposed of in a proper
manner
12 Product specification
12.1 SPH series energy storage machine product specification
Model
Specifications
Growatt
SPH3000&SP
H 3000TL
BL-UP
Growatt
SPH3600
&SPH
3600TL BL-UP
Growatt
SPH4000
&SPH
4000TL BL-UP
Growatt
SPH4600
&SPH
4600TL BL-UP
Growatt
SPH5000
&SPH
5000TL BL-UP
Growatt
SPH6000&SPH
6000TL BL-UP
备注
Input data(DC)
Max.
6000W 7200W 7200W 8000W 8000W 9000W

Growatt SPH4000 Specifications

General

Model	SPH4000
Category	Inverter
Rated Power	4000 W
Max. DC Voltage	550 V
MPPT Voltage Range	120 V - 500 V
Number of MPPTs	2
AC Output Voltage	230 V
Frequency	50/60Hz
Efficiency	97.5%
Start Voltage	150 V
Nominal DC Voltage	360V
Max. Input Current per MPPT	11 A
AC Nominal Power	4000 W
Max. AC Apparent Power	4000 VA
AC Voltage Range	180 V - 280 V
Power Factor	0.8 leading to 0.8 lagging
THDi	<3%
AC Connection Type	Single phase
Max. Charge/Discharge Power	4000 W
Nominal Battery Voltage	48 V
Communication with BMS	CAN/RS485
Operating Temperature Range	-25°C to +60°C
Protection Degree	IP65
Topology	Transformerless
Weight	25 kg
Max. PV Input Voltage	550 V
Cooling Method	Natural Convection