2. Safety Precautions
2.1 Safety Instructions
1) Please read this manual carefully before installation. Damages caused by failure to follow the
instructions in the manual are beyond the warranty scope.
2) Only qualified and trained electrical technicians are allowed to perform operations on the
WIT Inverter.
3) During installation, please do not touch other parts inside the equipment other than the wiring
terminals.
4) Ensure that all electrical connections comply with local electrical standards.
5) Only designated personnel are permitted to perform maintenance on the inverter.
6) Before operating the WIT Inverter in the on-grid mode, ensure that you have obtained any
permission needed from the local grid operator.
Transportation
：
● Risk of injury when lifting the WIT Inverter, or injury caused by a falling
inverter as it is heavy. Please transport and lift the inverter carefully.
Installation
：
● Please read this manual carefully before installation. Damages caused by
failure to observe instructions specified in this manual are not covered under
any warranty.
● Do not connect any cables before installation.
● Please observe the installation instructions specified in this manual, including
the installation environment and clearance requirements.
● Install the WIT Inverter in a dry and well-ventilated location; otherwise,
performance de-rate may be initiated due to excessive temperature.
● Please read the installation instructions and safety precautions carefully
before installation.
Electrical Connections:
● Before connecting cables, ensure that the DC switches of the WIT Inverter
are OFF, and turn off the switch and breaker on the AC side and the battery
side. Otherwise, high voltages may cause severe injuries.
● It must be operated by qualified and trained electrical technicians.
Technicians should observe instructions in this manual and local regulations.
● High voltages may cause electric shocks and serious injury. Please do not
touch the WIT Inverter in operation.
● Do not install the inverter in potentially explosive and flammable
atmospheres.
To Next Page
Loading...
