EasyManua.ls Logo

Grundfos SE - Torques for Inlet and Outlet Flanges

Grundfos SE
99 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5.3 Components and material specification
Pos. Component Material Standard
1 M8 x 16 Hexagon socket head cap screw A4-70 DIN 912
7A 2.5 x 5 Round Head Rivets A2 DIN 660
9A Impeller key 1.4571 DIN 6885 B
12C M24 x 45 Set Screw A4-80 DIN 913
20 1/2" Plug DeltaTone/Silico -
27 Lock washer D11 x D6.4 x 0.7
28 M40 x 1.5 Cable gland Polyamide/CR -
32 13 x 24 x 2.5 Flat washer A4-70 DIN 125 A
35A M12 x 70 Hexagon head screw A4-80 DIN 933
37b *O-ring NBR 70 ISO 3601-1 Class B
39 *O-ring NBR 70 ISO 3601-1 Class B
39b 419.3 x 5.7 O-ring NBR 70 ISO 3601-1 Class B
50A Cover plate for inspection hole 1.4401 -
50B 42.2 x 5 O-ring NBR 70 ISO 3601-1 Class B
50D M10 x 25 Hexagon head screw A4-70 DIN 933
59A 167 x 3 O-ring NBR 70 ISO 3601-1 Class B
62 339.3 x 5.7 O-ring NBR70 ISO 3601-1 Class B
66 17 x 40 x 5 Washer for impeller EN 1.4404 -
66a M16 x 50 Hexagon head screw A4-80 DIN 933
67A Impeller plug Makrolon 9415 PC-GF 10 FR -
67B 17 x 26 x 1.2 Serrated Lock washer A4 DIN 6798 A
67 M16 x 70 Hexagon socket head cap screw A4-80 DIN 912
72 299 x 5.7 O-ring NBR 70 ISO 3601-1 Class B
89 M8 x 12 Hexagon socket head cap screw A2-70 DIN 912
93 M6 x 30 Hexagon socket head cap screw A4-70 DIN 912
105A M6 x 16 Hexagon socket head cap screw A4-80 DIN 912
105B Disc for shaft seal protection PTFE -
157D 65 x 5 O-ring NBR 70 ISO 3601-1 Class B
158 Centrifugal cup PA6.6 -
158A 72.39 x 5.33 O-ring NBR 70 ISO 3601-1 Class B
159 Wire Cover PTFE -
183 M10 x 25 Hexagon socket head cap screw A4-80 DIN 912
193 ISO 228-G 3/8" Plug AISI 316 -
198b *x56x2 Washer A4 -
198c *x56x* Disc spring A4 DIN 2093/-
230B lock washer A4-70 DIN 6798 A
400 126 x 3.53 O-ring NBR 70 ISO 3601-1 Class B
402 M10 x 1 Grease nipple Carbon steel Zinc plated DIN 71412 A
405 8.4 x 16 x 1.6 Washer Brass DIN 125 A
406 M8 Nut Brass DIN 934
410 M10x16 Set screw (plug) PTFE DIN 913
412 ISO 228-G 3/4" Plug AISI 316 -
520a M3 x 10 Slotted cheese head screw 4.8 (zinc plated) DIN 84
1084 M3 x 12 Hexagon Socket Head Cap Screw A2 DIN 912
1129 10.5 x 20 x 2 Washer A4 DIN 125 A
1173 17 x 23 Seal washer Cu -
* depends on pump version
18
English (GB)

Table of Contents

Other manuals for Grundfos SE

Related product manuals