Grundfos SE - Inspecting and Adjusting Impeller Clearance

Item Component
1 Terminal board
2 Moisture switch
3 Float switch with cable
4 PT100 insulated temperature sensor
5 PT100B temperature sensor
6 PVS3 Vibration sensor
7 Wire for moisture switch 1
8 Wire for moisture switch 2
9 Harness for float switch 2
10 Earthing cable
11 Harness PT100
12 Wire for common grounding
13 End sleeve DIN 46228-4 1-8
A Stator
26
English (GB)