Grundfos SE - Switch and Sensor Positions

5. Remove the power cables from the main terminal board.
a. Remove the M8 nuts and flat washers (A).
b. Remove all power cables. (B)
AB B
TM084094
6. Detatch the earth cable(s).
1
89A
407
230B
TM084093
7. Remove the power cable fixing clamps (409).
409
409
TM084095
8. Power cables can be safely removed from the pump now.
9. Pull the detatched cables away from the motor top.
10. Remove the O-ring (62) between the stator housing and the motor top.
38
English (GB)