11.5.10 Stator removal from the stator housing
1. Cut the stator wires off.
2. Turn the stator housing upside-down.
3. Heat the stator housing up to max. 210 °C for max. 10 minutes, or until the stator slides out / moves downwards.
4. Lift the stator housing off the stator.
TM084311
The heated stator cannot be used again.
WARNING
Hot surface
Death or serious personal injury
‐ Do not touch the heated parts surfaces. Wear
protective clothing.
55
English (GB)
To Next Page
Loading...
