Hermiankatu 6-8G, 33720 Tampere, Finland
©2019 Grundium. All rights reserved.
Image 15 Auto focus slider in the foot of the live view window.
8. Zoom out, press Add and select one or more areas you want to scan. To adjust the areas further, drag
the borders of the areas. Estimated scan time is shown on screen.
Image 16 Navigator window
If Focus not in range is shown on screen, you need to adjust the mechanical focus using live view (Image 10
and Image 12).
Tip: To quickly remove extra areas from the selected scanning area, press Trim all.
9. Press Scan to start the scanning. The remaining scan time is shown on screen and once the scan is
completed, the scanned areas are marked to the overview image and you can zoom into them.
To Next Page
Loading...