“V-TYPE” PREPACKAGED
TRANSFER SWITCHES
SECTION 3.1
DESCRIPTION & COMPONENTS
PART 3
Page 53
TERMINALS 23 AND 194:
These terminals connect the transfer relay to the
generator circuit board. See “Transfer Relay” in
Section 3.1.
FUSE HOLDER
The fuse holder holds two (2) fuses, designated as
fuses F1 and F2. Each fuse is rated 5 amperes.
FUSES F1, F2:
These two fuses protect the terminal board UTILITY 1
and 2 circuit against overload.
Figure 7. The Fuse Holder
To Next Page
