GVA GVA22FLEDCJ - EPG (Electronic Program Guide)

Customer Help Line
TEL: 1300 886 649
31
EPG (Electronic Program Guide)
EPG stands for Digital Electronic Program Guide. It is supplied by the
program providers and oers information about the programs to be
broadcast. You can access it in digital mode by pressing the EPG button on
the remote control, the menu will appear on the screen, as below:
NOTE: When the TV is rst turned on (in DTV mode), no EPG information
is displayed. If still no EPG information is displayed after you have
brought up the EPG menu, use the
/ and / buttons to navigate to
the channel you wish to display the information from and when it is
highlighted, press OK on the remote control to activate it.
Once you have activated a channel, use the
/ buttons to go to the top row
(Channel), then use the
button to bring up the programs to be broadcast
and the / buttons to move up and down the dierent timeslots.
Index
Press this button to bring up the index, press the
/ buttons to select the
time list or channel list.
Record
To record a selected program, press the RECORD button and insert an
appropriate USB device (see page 40 for more on this).
Schedule
Press the YELLOW button to bring up a schedule of programmed recordings.
Remind
Press the GREEN button and use the / buttons to navigate between programs.
Operating the menus (Cont.)