GW Instek GOM-804 - Calculate:compare:limit:upper; Calculate:compare:percent:lower

GOM-804 & GOM-805 使用手册
113
CALCulate:COMPare:LIMit:UPPer
Set
Query
Description
Sets or returns the upper limit value for the compare
function.
Syntax
Query Syntax
CALCulate:COMPare:LIMit:UPPer {<NRf>[,<String>]}
CALCulate:COMPare:LIMit:UPPer?
Parameter
<NRf>
000.0000~999.9999
<String>
mohm/ohm/kohm/maohm,unit
If unit is not set, the unit will be
automatically set by the present range.
Return parameter
<NR3>
000.0000~999.9999E±X
Example
CALC:COMP:LIM:UPP 0.123,maohm
Sets the upper limit value to 0.123MΩ.
CALC:COMP:LIM:UPP?
>0.1230E+6
Returns the upper limit as 0.123MΩ.
Note
This command is only applicable when compare mode is
set to ABS for compare function.
CALCulate:COMPare:PERCent:LOWer
Set
Query
Description
Sets or returns the lower limit percent value for the compare
function.
Syntax
Query Syntax
CALCulate:COMPare:PERCent:LOWer <NRf>
CALCulate:COMPare:PERCent:LOWer?
Parameter
<NRf>
000.00~999.99
Return parameter
<NR2>
000.00~999.99
Example
CALC:COMP:PERC:LOW 10.00
Sets the lower limit percent value to -10.00%.
CALC:COMP:PERC:LOW?
>10.00
Returns the lower limit as -10.00%.
Note
This command is only applicable when compare mode is
set to DPER or PER for compare function.