GW Instek GOM-804 - System:mdelay:data; System:mdelay:state; System:pwm:on

GOM-804 & GOM-805 使用手册
1 35
SYSTem:MDELay:DATa
Set
Query
Description
Sets or returns the measurement delay time.
Syntax
Query Syntax
SYSTem:MDELay:DATa <NRf>
SYSTem:MDELay:DATa?
Parameter/
Return parameter
<NRf>
0.000~100.000
Unit:ms
For values under 1s, the unit
resolution is 1ms.
For values above 1s, the unit
resolution is 0.1s.
Example
SYST:MDEL:DAT 1.105
Sets the delay time of measure is 1.1s.
SYST:MDEL:DAT?
>001.100
Returns the measurement delay as 1.1s.
SYSTem:MDELay:STATe
Set
Query
Description
Sets or returns the measurement delay function state.
Syntax
Query Syntax
SYSTem:MDELay:STATe <NR1> | {OFF|ON}
SYSTem:MDELay:STATe?
Parameter/
Return parameter
<NR1>
0:OFF.
1:ON.
OFF
Turn the measurement delay off.
ON
Turn the measurement delay on.
Example
SYST:MDEL:STAT OFF
Turns the measurement delay function off.
SYSTem:PWM:ON
Set
Query
Description
Sets or returns the duty ON period for the PWM drive
mode.
Note
PWM drive mode is only available for the GOM-805.