GOM-804 & GOM-805 User Manual
44
3. Reference
value setting
Use the arrow keys to navigate to the Reference setting
and press Enter.
Use the left and right arrow keys to select a digit. Use the
up and down arrow keys to edit the value of the selected
digit and the unit. Press Enter to confirm the setting.
Reference
Move
and edit
Select and
confirm
Enter
000.0001~ 999.9999
(mΩ/Ω/kΩ/MΩ)
After setting the Reference value, the displayed △, % or
△% values will be changed to reflect the new Reference
value setting.
4. Upper & lower
limit setting
Use the arrow keys to navigate to the Upper or Lower
limit setting and press Enter.
Use the left and right arrow keys to select a digit. Use the
up and down arrow keys to edit the value of the selected
digit. Press Enter to confirm the setting.
Repeat for the other limit (Upper or Lower).
Upper, Lower reference
Move
and edit
Select and
confirm
Enter
ABS mode: 000.0000~999.9999
(mΩ/Ω/kΩ/MΩ)
△% and % mode:
-999.99 ~ +999.99
The upper limit must be higher than the lower limit. Not
setting the upper limit higher than the lower limit is not
allowed. Likewise the lower limit cannot be set higher
than the upper limit.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
