GW Instek GPP-4323 - Page 125

REMOTE CONTROL
125
Command
:OUTPut[1|2|3|4]:OCP:STATe <b>
Function
Turns OCP protection on/off
Description
<b>
0/OFF:Turns OCP off.
1/ON:Turns OCP on.
Example
:OUTPut2:OCP:STATe ON
Turn on OCP on CH2.
Command
:OUTPut[1|2|3|4]:OCP:STATe?
Function
Queries the status of the OCP function.
Example
:OUTPut2:OCP:STATe?
Returns the status of the OCP function on CH2.
Command
:OUTPut[1|2|3|4]:OCP <value>
Function
Sets the OCP level.
Description
<value>
CH1 0.05-3.50A
CH2 0.05-3.50A
CH3 0.05-1.20A(GPP-4323)
CH4 0.05-1.20A(GPP-4323)
Example
:OUTPut2:OCP 1.5
Sets the OCP voltage to 1.5A for CH2.
Command
:OUTPut[1|2|3|4]:OCP?
Function
Queries the OCP current level.
Example
:OUTPut2:OCP?
Queries the OCP current level on CH2.