GW Instek GPP-4323 - Page 173

REMOTE CONTROL
173
Command
:SYSTem:CLEar
Function
Clear the error messages.
Example
:SYSTem:CLEar
Clears the error queue.
Command
:SYSTem:POSetup <name>
Function
Set the power on configuration.
Description
<name>
RST: Machine default settings.
Last: Machine last settings.
Example
:SYSTem:POSetup RST
Set the power on configuration to RST.
Command
:SYSTem:POSetup?
Function
Query the power on configuration.
Example
:SYSTem:POSetup?
Query the power on configuration.
Command
:SYSTem:COMMunicate:LAN:DHCP[:STATe] <b>
Function
Sets the DHCP state on or off.
Description
<b>
0/OFF: DHCP off
1/ON:DHCP on
Note: The :SYSTem:COMMunicate:LAN:APPLy
command must be executed before the DHCP
settings can take effect.
Example
:SYSTem:COMMunicate:LAN:DHCP ON
Enable DHCP.
Command
:SYSTem:COMMunicate:LAN:DHCP[:STATe]?