EasyManua.ls Logo

GW Instek LCR-1100 - Power, Battery, and Cleaning Safety

GW Instek LCR-1100
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SAFETY INSTRUCTIONS
7
Power Supply
WARNING
The instrument is powered by an internal LI-
ION battery for operation.
You can use the USB power adapter to connect
the instrument to the USB port (Type-C) to
charge the internal LI-ION battery.
The minimum output of the USB power adapter
is 5VDC, 2A.
The USB power adapter must comply with CE
regulations to ensure the safety of charging the
instrument.
Battry
WARNING
There is a rechargeable lithium battery in the
product. Please read all safety information carefully
to avoid battery heating, explosion, fire and serious
personal injury caused by incorrect use.
Please use the original lithium battery (LCR-
305) to ensure the safety of the instrument.
Using non-original batteries may cause danger
to the user or damage the instrument.
Do not use this product in direct sunlight for a
long time.
Do not use or store this product in a car in hot
weather.
Do not continue charging after charging is
complete.
Do not put this product near a fire source, and
do not throw this product into a fire.
Do not attempt to charge the battery with a
damaged charger.
Cleaning the
Instrument
Disconnect the USB cord before cleaning.
Do not clean the inside of the instrument.
Use a soft cloth dampened in a solution of mild
detergent and water. Do not spray any liquid.

Related product manuals