GW Instek LCR-8101G - Set Vertical Axis (Auto + Percentage)

LCR-8000G Series User Manual
100
Set vertical axis (Auto + Percentage)
Background
The Y (vertical) axis configuration is available for:
 Manual or Automatic fit: Selects whether the
vertical range is manually set or automatically
adjusted as the graph is plotted.
 Absolute or Percentage: Selects how the vertical
range is defined, as absolute values (minimum
and maximum) or percentage of the nominal
(center) value.
Panel operation
1. Press F2 to select % (Percentage).
Abs %
F 2
2. Press F3 to select Auto Fit.
Auto Fit
F 3
3. The nominal value appears on the display.
Step Size: 2 4 81
Nominal:1.0000mF
Set Nominal level
4. Press the Up/Down key to move the
cursor to Nominal.
Nominal:1.0000mF
5. Use the numerical keys to enter the nominal
value on which the Hi and Lo percentages are
based.
Range
According to each measurement item
(see page38).
1.2mΩ
m
Ω
Enter
1.5kH
Enter
H
k
w ww . . co m
information@itm.com1.800.561.8187