LCR-8000G Series User Manual
104
Running Graph Measurement
Run measurement
1. When the configuration is
completed, press F4 (Start) to start
the graph measurement.
2. The display changes into graph mode and starts
plotting the measurement data.
CAPACITANCE VS FREQUENCY
ABORT
20.0 40.0 60.0 80.0 100
(Hz)
300.0n
250.0n
(F)
MKR: 40.000 Hz
Cs : 247.04nF
LEVEL: 10.0mV
SPEED:FAST
*7
Measurement Ongoing
Latest Measurement
Data (Updated)
Drive Level (or Frequency)
and Speed
3. To abort the measurement, press F6
(Abort).
4. When completed, the buzzer sounds once and
the display shows the whole plotted data.
w ww . . co m
information@itm.com1.800.561.8187
To Next Page
Loading...
