GW Instek LCR-8101G - Use Display Value as Nominal

LCR-8000G Series User Manual
70
Backspace
All clear
Clear
Hi and Lo values are automatically swapped if
necessary
Hi and Lo Swapped
4. The display updates the Hi/Lo result
immediately. The result is pass if the bar stays
in the central area. The buzzer sounds
accordingly.
Result > Hi
HI
Result < Lo
LO
Lo < Result < Hi
(Pass)
PASS
Use display value as nominal
Panel operation
(For Percentage and Delta only) The
displayed value can be used as the
nominal value. Press F6 (Save Nom) to
copy the display value to the nominal
value.
F 6
1.2345
0.2179
mF
D
LO
–
Hi
Lo
+1.00%
–1.00%
100.00mF
1.2345
0.2179
mF
D
PASS
–
Hi
Lo
+1.00%
–1.00%
1.2345mF
w ww . . co m
information@itm.com1.800.561.8187