GW Instek LCR-8101G - Select AC Mains Frequency (50;60 Hz)

GETTING STARTED
23
Select AC mains frequency (50/60Hz)
Background
Although the LCR-8000G works under both 50 and
60Hz power frequencies, we recommend selecting
the frequency that matches the local setting to get
the best measurement precision, especially at
lower frequencies (< 100Hz).
Panel operation
1. Press the Menu key, then F5
(System). The system menu appears.
Menu
F 5
Precision LCR Meter LCR-8101G
5
:
Frequency
Software version 2.04 Apr 25 2009
RS-232
Graph mode
GPIB
Line frequency
Beep
GPIB address
:
:
OFF
50Hz
1MHz
Average : 10
2. Press the Up/Down key and move
the cursor to Line frequency.
:Line frequency 50Hz
3. If necessary, press the Left/Right
key to select the frequency, from 50
to 60Hz or from 60Hz to 50Hz.
:Line frequency 60Hz
w ww . . co m
information@itm.com1.800.561.8187