GW Instek LCR-8101G - Set Vertical Axis (Manual + Percentage)

GRAPH MODE
97
Set vertical axis (Manual + Percentage)
Background
The Y (vertical) axis configuration is available for:
 Manual or Automatic fit: Selects whether the
vertical range is manually set or automatically
adjusted as the graph is plotted.
 Absolute or Percentage: Selects how the vertical
range is defined, as absolute values (minimum
and maximum) or percentage of the nominal
(center) value.
Panel operation
1. Press F2 to select % (Percentage).
Abs %
F 2
2. Press F3 to select Manual Fit.
Manual Fit
F 3
3. The Hi percentage, Lo percentage, and the
nominal value of the vertical axis appear.
Step Size:
Cs Hi
Cs Lo
Nominal:
:
:
2 4 81
-19.500%
10.500%
100.00mF
Set Hi level
4. Press the Up/Down key to move the
cursor to Hi percentage.
Cs Hi: 10.500%
5. Use the numerical keys to enter the percentage.
Range
–1.0x10
12
(Tera) ~ 1.0x10
12
(Tera) %
50%
Enter
1200%
k
Enter
w ww . . co m
information@itm.com1.800.561.8187