GW Instek LCR-8101G - Multi-Step Program File Operation; Multi-Step File Save Program

LCR-8000G Series User Manual
84
Multi-Step Program File Operation
Save program
Save (overwrite)
Press F4 (Save) to save the program
being edited. A confirmation message
appears on the display.
Program saved
F 4
Save as (new
program)
1. Press F5 (File), then F3 (Save As).
The new program name dialogue
appears.
F 5
F 3
MULTI STEP MODE
Save as
F 1
F 2
F 3
F 4
Step
PROGRAM: NONAME
Set–
Func
Freq
Volt
Bias
Spd
Hi
Lo
Dly
500.00mS
01 02 03
B Rdc OFF
1.0000k
10mV
MAX FAST
1.0000 S
9999 ms 0 mS
1.00 V
0.0000Ω
0.0000Ω
LOAD
F 6
DELETE
New
QUIT
Save program as: New_
0123456789-_
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
Edit by ↑↓←→ key
Enter- Confirm, Clear- Quit
2. Enter the new program name using the arrow
keys.
Move cursor
(Left/Right keys)
JKLMNOPQRS
Enter the letter
(Down key)
program name: N_
Delete one letter
(Up key)
program name: _
w ww . . co m
information@itm.com1.800.561.8187