GW Instek LCR-8101G - Configuration Configure Beep Setting

LCR-8000G Series User Manual
62
RP
Parallel resistance
θ
Angle
For detailed description of each item, see page38.
Configure beep setting
Background
The beep sounds when the pass/fail test result
matches the setting: failed or passed.
Panel operation
1. Press the Menu key, then F5
(System). The system configuration
appears.
Menu
F 5
Precision LCR Meter LCR-8101G
5
:
Frequency
Software version 2.04 Apr 25 2009
RS-232
Graph mode
GPIB
Line frequency
Beep
GPIB address
:
:
OFF
50Hz
1MHz
Average : 10
2. Press the Up/Down key and move
the cursor to Beep.
Beep : OFF
3. Press the Left/Right key to select the
beep setting, Off, Pass, or Fail.
Off
Beep is turned Off
Pass
Beeps when the test result is pass
Fail
Beeps when the test result is fail
w ww . . co m
information@itm.com1.800.561.8187