GW Instek LCR-8101G - Page 121

REMOTE CONTROL
121
:graph:lo-lim
<NR3>
Set the minimum value for Y-axis in the graph
mode.
Parameter: real number up to 1^12 (1e+12)
Example: :graph:lo-lim -8.5e9
Note: The graph limits will only work whilst the
“autofit” function is set to “off”
:graph:lo-lim?
Returns minimum value for Y-axis of the graph
mode.
:graph:nom
<NR3>
Set the nominal value for the graph.
Parameter: 3, 1e-1, 100e1
Example: :graph:nom 1e-1
Note: Nominal can only be set if the graph limit is
set as a %(percentage)
:graph:nom?
Returns the current graph nominal.
:graph:logf<disc>
Selects the frequency scale type.
Parameter: on, off
Example: :(on) graph:logf on
:graph:logf?
Returns the current frequency scale type.
Returned parameter 1(on), 0(off).
:graph:limit
<disc>
Selects absolute or relative plotting.
Parameter: perc( % relative), abs(absolute)
Example: :graph:limit abs
:graph:limit?
Returns the current graph plotting mode.
Returned parameter: 0(abs), 1(percentage)
w ww . . co m
information@itm.com1.800.561.8187