GW Instek LCR-8101G - Page 126

LCR-8000G Series User Manual
126
Trim the LCR-8000G
Fixture setting
Prepare the fixture accordingly. (In order to run a
complete trimming, both O/C and S/C trimming
have to be done.)
O/C trimming
S/C trimming
Alt. S/C
trimming
H
S
H
F
L
S
L
F
Panel operation
1. Press the Calibration key. The
calibration mode menu appears.
Calibration
CALIBRATE MODE
O/C Trim
S/C Trim
F 1
F 2
F 6
MEASURE
*
To go back to the measurement
mode, press F6 (MEASURE).
F 6
w ww . . co m
information@itm.com1.800.561.8187