GW Instek PSU 100-15 - External Voltage Control of Voltage Output

REMOTE CONTROL
121
Note
The setting will only be valid after the power has been
cycled.
Syntax
Query Syntax
:SYSTem:COMMunicate:LAN:DHCP
{<bool>|OFF|ON}
:SYSTem:COMMunicate:LAN:DHCP?
Parameter
OFF | 0
DHCP off
ON | 1
DHCP on
Return parameter
<bool>
Returns the DHCP status.
Example
SYST:COMM:LAN:DHCP ON
SYST:REB
Sets the DHCP active and reboot the unit to active
the setting.
:SYSTem:COMMunicate:LAN:DNS
Set
Query
Description
Sets or queries the DNS address.
Note
The setting will only be valid after the power has been
cycled.
Syntax
Query Syntax
:SYSTem:COMMunicate:LAN:DNS <string>
:SYSTem:COMMunicate:LAN:DNS?
Parameter/Return
<string>
DNS in string format ( “mask”)
Applicable ASCII characters: 20H to 7EH
Example
SYST:COMM:LAN:DNS “172.16.1.252”
SYST:REB
Sets the DNS to 172.16.1.252 reboot the unit to
active the setting.
:SYSTem:COMMunicate:RLSTate
Set
Query
Description
Enables or disables local/remote state of the
instrument.