GW Instek PSU 100-15 - Commands:Status:operation:condition; Status:Status:operation[:Event]

REMOTE CONTROL
89
Status Commands
For an overview of all the status registers, their associated register
contents and the system diagram, please see the status overview on
page 138
:STATus:OPERation[:EVENt] .......................................... 89
:STATus:OPERation:CONDition ..................................... 89
:STATus:OPERation:ENABle ........................................... 90
:STATus:OPERation:PTRansition .................................... 90
:STATus:OPERation:NTRansition ................................... 90
:STATus:QUEStionable[:EVENt] ..................................... 91
:STATus:QUEStionable:CONDition ............................... 91
:STATus:QUEStionable:ENABle ...................................... 91
:STATus:QUEStionable:PTRansition ............................... 91
:STATus:QUEStionable:NTRansition .............................. 92
:STATus:QUEStionable:INSTrument
:ISUMmary<n>[:EVENt] ................................................... 92
:STATus:QUEStionable:INSTrument
:ISUMmary<n>:CONDition.............................................. 92
:STATus:QUEStionable:INSTrument
:ISUMmary<n>:ENABle .................................................... 93
:STATus:PRESet ................................................................... 93
:STATus:OPERation[:EVENt]
Query
Description
Queries the Operation Status Event register and
clears the contents of the register.
Syntax
:STATus:OPERation[:EVENt]?
Return
<NR1>
Returns the bit sum of the Operation
Status Event register.
:STATus:OPERation:CONDition
Query
Description
Queries the Operation Status register. This query
will not clear the register.
Syntax
:STATus:OPERation:CONDition?