GW Instek PSU 100-15 - System:communicate:serial:language [:Select]; System:communicate:tcpip:control

PSU Series Programming Manual
122
Syntax
Query Syntax
:SYSTem:COMMunicate:RLSTate
{LOCal|REMote|RWLock}
:SYSTem:COMMunicate:RLSTate?
Parameter/Return
parameter
LOCal
All keys are valid. This instrument is
controlled by the front panel controls.
REMote
All keys are invalid, except for the [local]
key and the ability to turn the output off.
RWLock
All keys are invalid. The instrument can
only be controlled remotely.
Example
:SYST:COMM:RLST LOCAL
Sets the operating mode to local.
:SYSTem:COMMunicate:TCPip:CONTrol
Query
Description
Queries the socket port number.
Query Syntax
:SYSTem:COMMunicate:TCPip:CONTrol?
Return parameter
<NR1>
0000 ~ 9999
Example
SYST:COMM:TCP:CONT?
>2268
Returns the socket port number.
:SYSTem:COMMunicate:SERial:LANGuage
[:SELect]
Set
Query
Description
Sets or queries the communication protocol for the
serial port.
Syntax
Query Syntax
:SYSTem:COMMunicate:SERial:LANGuage[:SELect]
{“SCPI”|“LEGACY”}
:SYSTem:COMMunicate:SERial:LANGuage[:SELect]?
Parameter/Return
parameter
“SCPI”
Sets the communication protocol to
SCPI.