Mobile phone client
of the fifth version of Symbian S60 is
: MEYE_SB_S60_5rd.sisx
Mobile phone client of Android system is: vMEyeSuper.apk
Mobile phone client of Blackberry system is: MEYE_RIM.cod
Mobile phone client of Apple system is: vMEye (please search and install in Appstore)
Note: Mobile phone monitoring software can also support cloud technology access.
7 FAQ and use and maintenance
7.4 FAQ
1.System can not detect hard disk.
Possible reasons are as follows:
1 The hard disk power supply line is not well connected.
2 The cables of the hard disk are damaged.
3 The hard disk is damaged.
4 The SATA port of main board is damaged.
2.There are no video outputs in single channel, multiple channels and all channels.
Possible reasons are as follows:
1 The program is not matched. Please update the program.
2 The image brightness is all 0. Please resume the default setup.
3 There is no video input signal or the signal is too weak.
4 The channel protection or the screen protection is setted.
5 The hardware of the DVR is damaged.
3.Real-time image problems such as the image color or the brightness distortion.
Possible reasons are as follows:
1 When using the BNC output, the option between the NTSC mode or PAL mode is wrong and the image becomes
black and white.
2 The DVR is not matched with the monitor impedance.
3 The video transmission distance is too far or the loss of the video transmission line is too large.
4 The color and brightness setting of the DVR is wrong.
4.I can not find the video files in local playback mode.
Possible reasons are as follows:
1 The data line of the hard disk is damaged.
2The hard disk is damaged.
4.3 Update the different program with the origin program files.
4 The video files to search are covered, or search time is wrong, please refer to the device display time.
5 The recording stopped.
5.The local playback video is not clear.
Possible reasons are as follows:
To Next Page
Loading...
